USER GUIDE
We're updating this page regualrly. Return once in a while for newly revealed features.
Fitting your Zealot Backpack

The Zealot backpack has multiple fit points to ensure a unique fit for every rider - even you.
Unique Features

Multi-Point Adjustable Strap
Your Zealot strap is adjustable at almost every point, from the chest armor to the sides and even the waist straps. Use the buckles to easily remove your backpack.

Replacable Reflective Strips
The reflective strips are built to be peelable and replaceable. If your backpack is mudded up or dirty, peel and replace with third party reflective strips. Apply glue to affix new strips.

Hidden Handle
Haul your backpack around with the hidden handle right above the Hardshell Meral FarMyth Logo. Especially useful when filling up your expanded backpack.

Stands Upright
With proper weight distribution, the Zealot can stand on its base.

STRAPPING ON YOUR ZEALOT BACKPACK
- Loosen the shoulder straps.
- Put it on as you would a typical backpack.
- Adjust the placement of your chest armor and the fit on all straps.
- Use the velcro ends to lock in your configuration.
ACCESS YOUR CHEST STORAGE
- Locate the zipper slider behind your chest armor, and unzip it to reveal your accessible storage.


EXPANDING YOUR MAIN STORAGE
- Turn your Zealot backpack around to the back padding side. Locate the gusset zipper to the bottom right, and unzip its full circumference.
SETTING/RESETTING YOUR PASSWORD LOCK CODE
- Use a ballpoint to push in the reset button on the opposite side of the digit wheels. Then enter your new code.
USING YOUR TSA PASSWORD LOCK
- Zip your backpack shut, and move both zippers to the TSA lock side. Click in the sliders and enter your passcode.


USING THE POWER BANK
- Power on: Hold the power button on the side of the power bank for 3 seconds until a green LED light appears.
- Power Off: Hold the power button for 2 seconds until the green light is off.
- Note: The power bank will shut off after 30 seconds to save power if the LED light bar is not turned on.
- Note 2: You can power your Zealot backpack with any 12V 2A powerbank with a 5521 hole.
ACTIVATE YOUR LED LIGHT BAR
Click the power button located at the top of the right shoulder strap to turn on your LED ambient light bar. To turn it off, click again on the power button.
Note: Your power bank needs to be powered on before you can switch on your LED ambient light bar.


ACTIVATE YOUR HIDDEN TRACKER TAG
BEFORE YOU START:
- The tracker tag compartment Velcro is extra strength to prevent rapid tag removal in the event of theft.
- You don’t have to open the tracker tag compartment to access its power button and functions.
- The current provided tracker tag only works on iOS devices. You can optionally replace or add addional tags to work with your use case.
Power On:
- Press on the tag through the compartment once. You should hear a 5-beep sequence. On iOS devices, go to the FindMy App and follow these steps to find and connect your tag: FindMy > Items > + > Add Other Item > Connect
POWER OFF:
- Press and hold the tag’s power button through the compartment for 5 seconds. You should hear 2 beeps.
The more questions are asked, the more prone they are to featuring below.
We'd love to answer your questions with clarity and transparency.